Engineering, 06.03.2020 22:00 brittsterrr
An npn silicon transistor is biased in the inverse-active mode with VBE 3 V and VBC 0.6 V. The doping concentrations are NE 1018 cm3 , NB 1017 cm3 , and NC 1016 cm3 . Other parameters are xB 1 m, E0 B0 C0 2 107 s, DE 10 cm2 /s, DB 20 cm2 /s, DC 15 cm2 /s, and A 103 cm2 . (a) Calculate and plot the minority carrier distribution in the device. (b) Calculate the collector and emitter currents. (Neglect geometry factors and assume the recombination factor is unity.)
Answers: 2
Engineering, 04.07.2019 18:10, jojoangelique13
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:20, aly95
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 19:10, nbunny7208
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces. a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
An npn silicon transistor is biased in the inverse-active mode with VBE 3 V and VBC 0.6 V. The dopin...
English, 28.06.2019 22:30
English, 28.06.2019 22:30
Computers and Technology, 28.06.2019 22:30
Mathematics, 28.06.2019 22:30
History, 28.06.2019 22:30
English, 28.06.2019 22:30
English, 28.06.2019 22:30