The pressure distribution over a section of a two-dimensional wing at 4 degrees of incidence may be approximated as follows: Upper surface: Cp constant at – 0.8 from the leading edge to 60% chord, then increasing linearly to +0.1 at the trailing edge. Lower surface: Cp constant at – 0.4 from the leading edge to 60% chord, then increasing linearly to + 0.1 at the trailing edge. Estimate the lift coefficient and the pitching moment coefficient about the leading edge due to lift.

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?