Show that the vectors ?1,2,1?,?1,3,1?,?1,4,1??1,2,1?,?1,3 ,1?,?1,4,1? do not span R3R3 by giving a vector not in their span:

equation editor

Equation Editor

NOTE: Enter the vector using angle brackets. (use the "less than < " and " greater than >" symbols.)

Find vectors u and v such that W=span{u, v}

u=u=

[

equation editor

Equation Editor ]

equation editor

Equation Editor

equation editor

Equation Editor , v=v=

[

equation editor

Equation Editor ]

equation editor

Equation Editor

equation editor

Let WW be the set of all vectors of the form:

[ -bb+4cc ]

bb

cc .

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Ashielded metal arc-welding operation is accomplished in a work cell by a fitter and a welder. the fitter takes 5.5 min to load components into the welding fixture at the beginning of the work cycle, and 1.5 min to unload the completed weldment at the end of the cycle. the total ength of the weld seams 1200 mm, and the travel speed used by the welder averages 300 mm/min. every 600 mm of seam length, the welding stick must be changed, which takes 0.8 min. while the fitter is working, the welder is idle (resting): and while the welder is working the fitter is idle. (a) determine the average arc-on time as a fraction of the work cycle time. (b) how much improvement in arc-on time would result if the welder used flux-cored arc welding (manually operated), given that the spool of weld wire must be changed every 10 weldments, and it takes the welder 5.0 min to accomplish the change? (c) what are the production rates for these two cases (weldments completed per hour)? attach your work and solutions.