Engineering, 05.03.2020 16:45 emrecaga1992
The W/L ratios of the two differential transistors in a nmos differential amplifier are mismatched by 2%, and a CMRR>80dB is required. If _m=0.18m _=100 _=0.2 _^′=5 /m And if the tail current ideal source is replaced by a nmos transistor, find the necessary L for the bias current source transistor. What is the transconductance percent mismatch?
Answers: 1
Engineering, 03.07.2019 15:10, margaret1758
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
The W/L ratios of the two differential transistors in a nmos differential amplifier are mismatched b...
English, 30.11.2019 22:31
Social Studies, 30.11.2019 22:31
English, 30.11.2019 22:31
English, 30.11.2019 22:31
English, 30.11.2019 22:31