Engineering, 05.03.2020 09:28 sugarpiegiselle6915

Design a battery-charging circuit using an ideal diode, in which current flows to the 12-V battery 25% of the time with an average value of 100 mA.

a. What peak-to-peak sine-wave voltage is required?

b. What resistance is required?

c. What peak diode current flows?

d. What peak reverse voltage does the diode endure?

e. If resistors can be specified to only one significant digit, and the peak-to-peak voltage only to the nearest volt, what design would you choose to guarantee the required charging current?

f. What fraction of the cycle does diode current flow?

g. What is the average diode current?

h. What is the peak diode current?

i. What peak reverse voltage does the diode endure?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, bunnles

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, demarcuswiseman

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

continue

Engineering, 04.07.2019 18:10, katelynn73

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

continue

You know the right answer?

Design a battery-charging circuit using an ideal diode, in which current flows to the 12-V battery 2...