Engineering, 04.03.2020 03:04 johny144
A solid titanium alloy [G 114 GPa] shaft that is 720 mm long will be subjected to a pure torque of T 155 N m. Determine the minimum diameter required if the shear stress must not exceed 150 MPa and the angle of twist must not exceed 7?. Report both the maximum shear stress ? and the angle of twist ? at this minimum diameter. ?Part 1 where d is the shaft diameter. The polar moment of inertia is also a function of d. Find Incorrect. Consider the elastic tors on formula. The maximum shear stress occurs at the radial location ? = (d 2 the value of d for which the maximum shear stress in the shaft equals 150 MPa. Based only on the requirement that the shear stress must not exceed 150 MPa, what is the minimum diameter of the shaft? dr 16.1763 the tolerance is +/-2% Click if you would like to Show Work for this question: Open Show Work Attempts: 1 of 3 used SAVE FOR LATER SUBMIT ANSWER Part 2 Based only on the requirement that the angle of twist must not exceed 7°, what is the minimum diameter of the shaft?
Answers: 1
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, siri5645
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
Engineering, 04.07.2019 18:20, cdyshaylia55
Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg
Answers: 2
Engineering, 04.07.2019 19:20, lordcaos066
Determine the time of the day and month of the year at which the peak sensible cooling load occurs for a top floor, north-eastern corner room of an office building in durban for the following conditions: floor area: 8 x 8 x 3 m east and north walls: 115 mm face brick (outside), 20 mm air space, 115 mm ordinary brick (inside) with 15 mm plaster roof construction: suspended plasterboard ceiling, 450 mm air space, 150 mm concrete, 75mm screed, waterproofing no heat transfer across other surfaces window area 3x 1,5 m high in north wall only. ordinary glass with venetian blinds. lights and occupants : from 07: 00 to 18: 00 average light density: 25 w/m2 number of occupants : 5 seated, light office work room temperature 24°c
Answers: 3
You know the right answer?
A solid titanium alloy [G 114 GPa] shaft that is 720 mm long will be subjected to a pure torque of T...
Questions in other subjects:
Mathematics, 09.10.2020 06:01
Social Studies, 09.10.2020 06:01
History, 09.10.2020 06:01
