Engineering, 03.03.2020 22:00 jamayeah02

The flow of a liquid in a 2 inch nominal diameter steel pipe produces a pressure drop due to friction of 78.86 kPa. The length of pipe is 40 m and the mean velocity is 3 m/s. if the density of the liquid is 1000 kg/m^3, then a) determine the reynolds number b) determind if the flow is laminar or tubulent c) compute viscosity of the liquid d) compute the mass flow rate (assume ?, equivalent roughness factor, for Steel pipe to be 45.7 x 10-6 m)

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 18:10, danksans7011

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

continue

Engineering, 04.07.2019 18:10, dval1146

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

continue

Engineering, 04.07.2019 18:20, hayleymckee

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

continue

You know the right answer?

The flow of a liquid in a 2 inch nominal diameter steel pipe produces a pressure drop due to frictio...