subject
Engineering, 02.03.2020 23:31 hunterkerlin20p3l6ff

Given: A graphite-moderated nuclear reactor. Heat is generated uniformly in uranium rods of 0.05m diameter at the rate of 7.5 x 107 W/m3. These rods are jacketed by an annulus in which water at an average temperature of 120 deg C is circulated. The water cools the rods with an average convection coefficient of 55,000 W/m2-K. The thermal conductivity of uranium is 29.5 W. m-K. Find: The maximum center temperature of the uranium fuel rods.

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, BardiFan
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
image
Engineering, 04.07.2019 19:10, rayne40
A)-in the process of engineering design, explain the contribution of material selection. b)- explain the procedure of synthesis as is employed in engineering design. c)- is there any relationship between ergonomics and engineering design? explain. d)- safety consideration in engineering design includes human, product and the enviroment . explain how safety will be incorporated into the design?
Answers: 3
image
Engineering, 06.07.2019 03:20, shelbellingswo
Aload of 10kn is to be suddenly applied to the free end of a vertical rod of length 500 mm, the upper end being rigidly fixed. 190 mechanical science what should the diameter of the rod be if the maximum stress in the rod is not to exceed 100 mpa? the tensile modulus of the rod is 205 gpa.
Answers: 2
image
Engineering, 06.07.2019 03:20, harleyandpope90
Aparticle moves along a straight line such that its acceleration is a=(4t^2-2) m/s, where t is in seconds. when t = 0, the particle is located 2 m to the left of the origin, and when t = 2, it is 20 m to the left of the origin. determine the position of the particle when t=4s.
Answers: 1
You know the right answer?
Given: A graphite-moderated nuclear reactor. Heat is generated uniformly in uranium rods of 0.05m di...

Questions in other subjects:

Konu
Mathematics, 28.09.2019 03:40
Konu
Mathematics, 28.09.2019 03:40
Konu
History, 28.09.2019 03:40