Engineering, 02.03.2020 19:49 starlightmoon213

The cables of a power line are copper-coated steel wire. The overall diameter of the wire is 5/8 in. The steel core has a diameter of 1/2 in.
If the maximum tension in a wire is 8000 lb, what are the stresses in the steel and the copper?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 19:20, zoebtharpe

Heat transfer by is the fastest mode of heat transfer that requires no intervening medium. a)-conduction b)-convection c)-radiation d)-conduction and convection

Answers: 1

continue

Engineering, 06.07.2019 03:30, Scotdouglas346

Acubic shaped box has a side length of 1.0 ft and a mass of 10 lbm is sliding on a frictionless horizontal surface towards a 30 upward incline. the horizontal velocity of the box is 20 ft/s. determine how far up the incline the box will travel (report center of mass distance along the inclined surface, not vertical distance)

Answers: 1

continue

Engineering, 06.07.2019 05:10, calmicaela12s

Through changes in clamping, a sheet-metal forming operation can allow the material to undergo a negative minor strain in the forming limit diagram. explain how this effect can be advantageous.

Answers: 3

continue

Engineering, 10.07.2019 19:30, michael4443

Spool design on a pneumatic dcv has no seals between the spool and the bore?

Answers: 3

continue

You know the right answer?

The cables of a power line are copper-coated steel wire. The overall diameter of the wire is 5/8 in....