If a 10 milliohm current shunt is in series with a DC motor that draws 30A in the stalled state. How much error as a percentage of the measured voltage could be caused by a LM741C configured for x10 gain under worst case conditions when the motor is stalled?

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.

How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?