Engineering, 29.02.2020 01:04 jennyferluna0216

Give a control unit design for this processor usingD-flip-flopssimilar to the one we designedinthelectures for Vesp 1.0.The design should include fetch, decode and execute stepsin as much detail as possible.

Answers: 3

Show answers

Answers

Answer from: doughboy123

Control unit design for this processor usingD-flip-flopssimilar to the one we designedinthelectures for Vesp 1.0.

Explanation:

1.We designed an ALU based on (a) building blocks such as multiplexers for selecting an operation to produce ALU output, (b) carry lookahead adders to reduce the complexity and (in practice) the critical pathlength of arithmetic operations, and (c) components such as coprocessors to perform costly operations such as floating point arithmetic. We also showed that computer arithmetic suffers from errors due to fintie precision, lack of associativity, and limitations of protocols such as the IEEE 754 floating point standard.

2.The datapath is the "brawn" of a processor, since it implements the fetch-decode-execute cycle. ... Simple datapath components include memory (stores the current instruction), PC or program counter (stores the address of current instruction), and ALU (executes current instruction).

3.A Hard-wired Control consists of two decoders, a sequence counter, and a number of logic gates. An instruction fetched from the memory unit is placed in the instruction register (IR). ... The operation codes from Bits 0 through 11 are applied to the control logic gates.

4.A control unit or CU is circuitry that directs operations within a computer's processor. It lets the computer's logic unit, memory, as well as both input and output devices know how to respond to instructions received from a program. Examples of devices that utilize control units include CPUs and GPUs.

5.There are two types of control units: Hardwired control unit and Microprogrammable control unit.

Hardwired Control Unit Microprogrammable control unit

6.The control unit (CU) is a component of a computer's central processing unit (CPU) that directs operation of the processor. It tells the computer's memory, arithmetic/logic unit and input and output devices how to respond to a program's instructions

Answer from: Quest

At a roundabout you must yield to traffic already in the roundabout

Answer from: Quest

answer:

i dont know but you should start brainstorming ideas like how would you post them

explanation:

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, niicoleassssssf

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

continue

Engineering, 04.07.2019 19:10, Destinationz

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

continue

Engineering, 04.07.2019 19:20, ijohnh14

Apure substance is a)-mixture of various chemical elements or compounds b)-substance that has a fixed chemical composition throughout c)-mixture that is homogeneous (such as air) d)-all the answers

Answers: 3

continue

You know the right answer?

Give a control unit design for this processor usingD-flip-flopssimilar to the one we designedinthele...