Engineering, 28.02.2020 04:00 mouna45
A state of stress that occurs at a point on the free surface of a solid body is: σx = 60 MPa; σy =0 MPa; τxy =30 MPa a. Evaluate the two principal normal stresses and the one principal shear stress that can be found by coordinate system rotations in the x‐y plane, and show the coordinate system rotations to these principal stresses with sketches of the elements for both principal normal stresses and principal shear stresses, correctly oriented relative to x & y axes. b. Determine the maximum normal stress and the maximum shear stress at this point. Indicate which planes upon which these maxima are acting. That is, be sure the resulting maxima are labeled with the correct and appropriate subscripts.
Answers: 3
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 03.07.2019 15:10, theamandawhite
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 03:10, lauriepdx17
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10, qwertylol12345
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
A state of stress that occurs at a point on the free surface of a solid body is: σx = 60 MPa; σy =0...
History, 30.03.2020 21:39
Mathematics, 30.03.2020 21:39