Let us consider the heat engine which receives a heat transfer rate of 1 MW at a high temperature of 823 K and rejects energy to the ambient surroundings at 300 K. Work is produced at a rate of 450 kW.
(a) How much energy is discarded to the ambient surroundings?
(b) What is the engine efficiency?
(c) Compare the results to those of a Carnot heat engine under the same conditions. How much energy can be saved if we use a Carnot heat engine?

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

What is the correct way to measure the overall length of a boat? measure from the tip of the bow to the highest point on the gunwale. measure from the tip of the bow in a straight line to the stern of the boat. measure from the tip of the bow in a straight line to the back seat. measure from port to starboard at the boat's widest point.