Engineering, 27.02.2020 18:19 madison6592

An alloy fin with a thermal conductivity of 200 W/ሺm ∙ Kሻ has a length of 2.5 cm and a thickness of 3.5 mm. The base of the fin is held at 400o C and the ambient is at 20o C. Assuming that heat loss from the tip is negligible and that the convective heat transfer coefficient is 10 W/ሺmଶ ∙ Kሻ and the fin to be 1m wide, Find the heat transfer flux.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, alyssabailey7545

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

continue

Engineering, 04.07.2019 18:10, juansoto227711

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

continue

Engineering, 04.07.2019 18:20, DroctorWellsfan

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

continue

Engineering, 04.07.2019 19:10, juneham

Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.

Answers: 2

continue

You know the right answer?

An alloy fin with a thermal conductivity of 200 W/ሺm ∙ Kሻ has a length of 2.5 cm and a thickness of...