A 30 mm diameter pipe is used to carry a fluid whose velocity is 40 m/s. The temperature and pressure of the fluid are 120 °C and 1 MPa, respectively. Calculate the mass flow rate (kg/sec) when the fluid is (a) air and (b) H2O. Repeat your calculations if the pressure is 1 bar instead of 1 MPa.

On a average work day more than work place firs are reorted

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.