Engineering, 26.02.2020 20:31 shonnybenskin8

Carbon dioxide (CO2) gas, initially at T1 530R, p1 15 lbf/in.2 , and V1 1 ft3 , is compressed in a piston–cylinder assembly. During the process, the pressure and specific volume are related by pv1.2 constant. The amount of energy transfer to the gas by work is 45 Btu per lb of CO2. Assuming ideal gas behavior, determine the final temperature, in R, and the heat transfer, in Btu per lb of gas.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, colin774

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:10, jojoangelique13

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

continue

Engineering, 04.07.2019 18:20, rjone8429

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

continue

Engineering, 04.07.2019 19:10, santosbeti90

With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.

Answers: 1

continue

You know the right answer?

Carbon dioxide (CO2) gas, initially at T1 530R, p1 15 lbf/in.2 , and V1 1 ft3 , is compressed in a p...