subject
Engineering, 26.02.2020 05:57 toni240

A roadway is determined to have the following daily traffic for each direction: 2,000 passenger cars with two 2-kip single axle, 200 passes of single-unit trucks with one 10-kip single axle and one 22-kip tandem axle, and 100 passes of tractor semi-trailer trucks with one 12-kip single axle, one 18-kip tandem axle and one 50-kip triple axle. The soil resilient modulus of the subgrade is 3000 lb/in2 and the roadway pavement is designed for an overall standard deviation of 0.4, a reliability of 99% and the initial PSI is 4.5 and the TSI is 2.5. One newly constructed section of this roadway is a rigid pavement designed with a 9-inch slab with a modulus of subgrade reaction of 100 lb/in3 , a modulus of rupture of 700 lb/in2 , a modulus of elasticity of 4.0 million lb/in2 , and a joint transfer coefficient of 3.0. Another newly constructed section of the same roadway is a flexible pavement with a 5-inch hot-mix asphalt (HMA) surface, 10-inch dense-graded crushed stone base and a 9-inch crushed stone subbase. If the roadway has four lanes in each direction and is conservatively designed, which of the pavement sections will last longer and by how many years (all drainage coefficients are 1.0)

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, anna22684
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
image
Engineering, 04.07.2019 18:10, sarahgrindstaff123
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
image
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
image
Engineering, 04.07.2019 18:10, colin774
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
You know the right answer?
A roadway is determined to have the following daily traffic for each direction: 2,000 passenger cars...

Questions in other subjects:

Konu
Mathematics, 19.10.2019 03:30