Engineering, 25.02.2020 19:47 tommyaberman

A gear pump has the following dimensions:

Addendum radius = 50 mm
Dedendum radius = 35 mm
Width = 25 mm
a) What is its displacement Dp? Use Dp=0.5x(width)x((add. radius)2 -(deden. radius)2 )
b) Tests show that the pump’s volumetric efficiency and mechanical efficiency are 80% and 90% respectively when turning at 1000 rpm and deliver oil at 100 bar. Determine the delivered flow rate and the leakage flow rate under these conditions.
c) Assuming that leakage is proportional to pressure and that mechanical losses are proportional to the angular velocity of the pump, determine the volumetric efficiency, mechanical efficiency and power required to drive the pump at 1500 rpm while developing 140 bar.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, Fahaddie

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

continue

Engineering, 04.07.2019 18:10, Larkinlover703

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Answers: 1

continue

Engineering, 04.07.2019 18:10, wyattlb97

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

continue

Engineering, 04.07.2019 18:10, oliviasoreo92

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

continue

You know the right answer?

A gear pump has the following dimensions:

Addendum radius = 50 mm
Dedendum radiu...