Engineering, 25.02.2020 18:03 yonna74

Consider the following 10 "design rules" for electromechanical products.
Do these seem like reasonable guidelines? Under what circumstances could one rule conflict with another one? How should such a trade-off be settled?

1. Minimize parts count
2. Use modular assembly
3. Stack assemblies
4. Eliminate adjustments
5. Eliminate cables
6. Use self-fastening parts
7. Use self-locating parts
8. Eliminate reorientation
9. Facilitate parts handling
10. Specify standard parts

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, makaylashrout77

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

continue

Engineering, 03.07.2019 14:10, aliceohern

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

continue

Engineering, 04.07.2019 03:10, lauriepdx17

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

You know the right answer?

Consider the following 10 "design rules" for electromechanical products.
Do these seem like r...