A Diesel cycle engine is analyzed using the air standard method.
Given the conditions at stat...
Engineering, 25.02.2020 17:53 Nickanderson21
A Diesel cycle engine is analyzed using the air standard method.
Given the conditions at state 1, compression ratio (r), and cutoff ratio (rc) determine the efficiency and other values listed below.
Note: The specific heat ratio and gas constant for air are given as k=1.4 and R=0.287 kJ/kg. K respectively.
T1 (K) = 328
P1 (kPa) = 190
r = 14
rp = 1.3
rc = 1.3
a) Determine the specific internal energy (kJ/kg) at state 1.
b) Determine the relative specific volume at state 1.
c) Determine the relative specific volume at state 2.
d) Determine the temperature (K) at state 2.
e) Determine the pressure (kPa) at state 2.
f) Determine the specific enthalpy (kJ/kg) at state 2.
g) Determine the temperature (K) at state 3.
h) Determine the pressure (kPa) at state 3.
i) Determine the specific enthalpy (kJ/kg) at state 3.
j) Determine the relative specific volume at state 3.
k) Determine the relative specific volume at state 4.
l) Determine the temperature (K) at state 4.
m) Determine the pressure (kPa) at state 4.
n) Determine the specific internal energy (kJ/kg) at state 4.
o) Determine the net work per cycle (kJ/kg) of the engine.
p) Determine the heat addition per cycle (kJ/kg) of the engine.
q) Determine the efficiency (%) of the engine.
Answers: 1
Engineering, 03.07.2019 14:10, makaylashrout77
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 18:10, abdirahmansoloman
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
Arts, 22.01.2021 19:00
Chemistry, 22.01.2021 19:00
Mathematics, 22.01.2021 19:00
French, 22.01.2021 19:00
English, 22.01.2021 19:00