Generally the usual depth of first watering in crop field is required as:
a)3" inches in a plo...
Engineering, 25.02.2020 07:55 darkskinnednune
Generally the usual depth of first watering in crop field is required as:
a)3" inches in a ploughed field
b)9" inches in a ploughed field
c)12" inches in a ploughed field
d)1" inches in a ploughed field
Answers: 2
Engineering, 03.07.2019 14:10, cowgyrlup124
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20, esmemaluma00
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
English, 03.11.2020 22:50
SAT, 03.11.2020 22:50
History, 03.11.2020 22:50
Mathematics, 03.11.2020 22:50
Social Studies, 03.11.2020 22:50