" An existing equal-tangent sag vertical curve is designed for 60 mi/h. The initial grade is –3% and the elevation of the PVT is 754 ft. The PVC of the curve is at station 134 + 16 and the PVI is at 137 + 32. An overpass is being constructed directly above the PVI. The highway is for cars only (AASHTO minimum and recommended structure clearances do not apply) and the overpass design assumes the driver’s eye height is set conservatively to 5 ft. What is the lowest possible elevation of the bottom of the overpass structure to ensure sufficient stopping sight distance at 60 mi/h?"

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed. gi) ifn 1, what will happen to the material when transformed material when

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?