Engineering, 21.02.2020 06:23 jdto8

The homogeneous, reversible, exothermic, liquid phase reaction: A근R Is being carried out in a reactor system consisting of an ideal PFR followed by an ideal CSTR. The volume of the PFR is 75,000 L, and the volume of the CSTR is 150,000 L. The PFR operates at 150 °C, and the CSTR operates at 125 °C. The volumetric flow rate entering the PFR is 55,000 L/h, the concentration of A in this stream is 6.5 M, and the concentration of R is zero. The reaction is first order in both directions. The rate constant of the forward reaction at 150 °C is 1.28 h and the equilibrium constant based on concertation at 150 °C is 2.5. The rate constant at 125 °C is 0.280 h and the equilibrium constant is 3.51. (a) What is the rate of R leaving the CSTR (mol/h)? (b) The flowrate to the PFR is increased so that the fractional conversion of A is 0.5 in the efluent from the CSTR. All other parameters remain unchanged. What is the new production rate of R?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, BardiFan

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

continue

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

Engineering, 04.07.2019 18:10, ayoismeisjjjjuan

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

continue

You know the right answer?

The homogeneous, reversible, exothermic, liquid phase reaction: A근R Is being carried out in a reacto...