Engineering, 21.02.2020 04:56 kendelllh
A field sample of an unconfined aquifer is packed in a test cylinder. The length and the diameter of the cylinder are 50 cm and 6 cm, respectively. The field sample is tested using pure water (at 20 oC) for a period of 3 min under a constant head difference of 16.3 cm. As a result, 45.2 cm2 of water is collected at the outlet. Determine the hydraulic conductivity of the aquifer sample? On further observation it was noticed that the sample has a median grain size of 0.037 cm and a porosity of 0.30. Evaluate the validity of Darcy’s law?
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, tjeffers90028
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10, alyssabailey7545
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
You know the right answer?
A field sample of an unconfined aquifer is packed in a test cylinder. The length and the diameter of...
Questions in other subjects:
History, 03.05.2021 17:30
Biology, 03.05.2021 17:30
Mathematics, 03.05.2021 17:30
