The specification for a very large DC power supply is 2.18 megavolts at 0.18 amperes with a ripple factor of 0.1% and a regulation of 0.05%. Assuming any ripple is due solely to a 400 Hertz sinusoid, calculate:

a. The maximum RMS value of the ripple voltage, VAC.
b. The No-Load voltage of the power supply.

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.