Engineering, 20.02.2020 07:01 20stirltrer

A rigid horizontal bar ABC is supported by three vertical rods. There is no strain in the rods before load P is applied. After loap P is applied, the axial strain in rod (1) is

Determine the deflection of the rigid bar at B and the normal strain in rods (2) if there is a 0.60-mm clearance in the connection between rod (1) and the rigid bar before the load is applied.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 03.07.2019 14:10, aliceohern

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

continue

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

You know the right answer?

A rigid horizontal bar ABC is supported by three vertical rods. There is no strain in the rods befor...