Engineering, 20.02.2020 03:31 migos2377

The liquid-phase reaction A+B-->R+S takes place in a 100 L continuously stirred tank reactor operating isothermally and at steady state. The rate of formation of R is given by kCACB and the rate constant, k, is 7 L mol-1 min-1. Two feed streams, one containing 4.60 mol/L of A and the other containing 1.20 mol/L of B are introduced in equal volumes into the reactor. What is the initial concentration of the limiting reactant after the two streams immediately mix as they enter the CSTR?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 18:10, genyjoannerubiera

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

continue

You know the right answer?

The liquid-phase reaction A+B-->R+S takes place in a 100 L continuously stirred tank reactor oper...