subject
Engineering, 19.02.2020 21:02 pineapplefun

The intersection of Coliseum Avenue and Wakefield Street near Mythaca State University has a signal with a 60-second cycle length. At the start of each cycle, ;a protected left turn phase" is provided for EB traffic on Coliseum that is turning left onto NB Wakefield. This left turn (LT) phase is long enough to allow only 7 vehicles to turn left. Two conditions prevent an easy solution at the intersection: (1) Traffic near the university fluctuates during each hour, depending on the times at which classes begin or end. Between 15 and 25 minutes past each hour on MWF, an average of 9.7 drivers per minute try to enter the LT lane. During the rest of the hour, 5.7 drivers per minute want to turn left. (2) Other approach volumes are too large to permit additional time to be given to the left turns made from the EB approach. What is the probability that the 7-vehicle capacity of the LT lane will be exceeded during any cycle within the 10-minute peak each hour? What is the probability that the 7-vehicle capacity of the LT lane will be exceeded during any cycle during the rest of the hour (the "off-peak" period)?

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, soreese02
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
image
Engineering, 04.07.2019 18:20, samueltaye
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
image
Engineering, 04.07.2019 18:20, rhussein6452
Wiy doeres rere okhn a pump whon working betwon the same pressure range?
Answers: 2
image
Engineering, 04.07.2019 19:10, ultimateapes
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
You know the right answer?
The intersection of Coliseum Avenue and Wakefield Street near Mythaca State University has a signal...

Questions in other subjects:

Konu
Mathematics, 23.11.2020 18:50