Engineering, 19.02.2020 19:51 amanda1717
The following data are from total solids and total volatile solids tests on a wastewater sample. Calculate the total and volatile solids concentrations in milligrams per liter. Weight of empty dish = 68.942 g Weight of dish plus dry solids = 69.049 g Weight of dish plus ignited solids = 69.003 g Volume of wastewater sample = 100 ml
Answers: 1
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 19:10, 592400014353
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
Engineering, 04.07.2019 19:20, zoebtharpe
Heat transfer by is the fastest mode of heat transfer that requires no intervening medium. a)-conduction b)-convection c)-radiation d)-conduction and convection
Answers: 1
The following data are from total solids and total volatile solids tests on a wastewater sample. Cal...
English, 11.11.2020 19:50
Mathematics, 11.11.2020 19:50
Chemistry, 11.11.2020 19:50
Social Studies, 11.11.2020 19:50