subject
Engineering, 19.02.2020 19:35 jacamron

Two sinusoidal signals are known to exist within a given signal, a 5 Vrms 100 Hz signal and a 2 Vrms 3 kHz signal, but only the 100 Hz signal is of interest. If the analog filter from Assignment 5 is used with the same 2 kHz cutoff frequency, what will be the amplitude of both portions of the signal in voltage after filtering? (Hint: Use the plot from Question 7) Are the effects of the 3 kHz signal ever completely removed? (10 pt.)

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, brooklyn674
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
image
Engineering, 04.07.2019 18:10, abdirahmansoloman
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
image
Engineering, 04.07.2019 18:10, sarahgrindstaff123
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
image
Engineering, 04.07.2019 18:10, oshawn108
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k
Answers: 2
You know the right answer?
Two sinusoidal signals are known to exist within a given signal, a 5 Vrms 100 Hz signal and a 2 Vrms...

Questions in other subjects:

Konu
Mathematics, 29.10.2020 01:00
Konu
Mathematics, 29.10.2020 01:00
Konu
Mathematics, 29.10.2020 01:00
Konu
Mathematics, 29.10.2020 01:00