Engineering, 14.02.2020 04:29 ImCoolJenny
If biodegradable organic matter, oxygen, and microorganisms are placed in a closed bottle, the microorganisms will use the oxygen in the process of oxidizing the organic matter. The bottle may be treated as a batch reactor and the decay of oxygen may be treated as a first order reaction. Write the general mass balance equation for the bottle. Using a computer spread- sheet program, calculate and plot the concentration of oxygen each day for a period of 5 days starting with a concentration of 8 mg/L. Use a rate constant of 0.35 d-1 .
Answers: 3
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, oshawn108
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k
Answers: 2
Engineering, 04.07.2019 19:10, santosbeti90
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
Engineering, 04.07.2019 19:20, diawia
Air at a pressure of 1atm and a temperature of 40 c is in parallel flow over the top surface of a flat plate that is heated to a uniform temperature of 120 c. the plate has a length of 0.40m (in the flow direction) and a width of 0.15m. the reynolds number based on the plate length is 50, 000. what is the rate of heat transfer from the plate to the air? if the free stream velocity of the air is doubled and the pressure is increased to 10 atm what is the rate of heat transfer?
Answers: 2
Engineering, 06.07.2019 02:30, cofran
A75mm diameter shaft is supported in a journal bearing 75mm long with a diametral clearance of 0. 1mm. it supports a radial load of 1000 n and is lubricated with sae 50 oil at 70°c. find the friction torque and the power loss when the crankshaft rotates at 2900 rev/min.
Answers: 1
You know the right answer?
If biodegradable organic matter, oxygen, and microorganisms are placed in a closed bottle, the micro...
Questions in other subjects:
Mathematics, 31.07.2019 06:30
