Engineering, 12.02.2020 04:18 AleOfficial101
A switch-mode dc-dc converter is operating at a switching frequency of 20 kHz, and Vd ¼ 150 V. The average current being drawn by the dc motor is 8.0 A. In the equivalent circuit of the dc motor, Ea ¼ 100 V, Ra ¼ 0:25 Ω, and La ¼ 4 mH, all in series.
(a) Plot the output current and calculate the peak-to-peak ripple and
(b) plot the dc-side current.
Answers: 1
Other questions on the subject: Engineering
Engineering, 04.07.2019 16:10, TheOriginalMeyah
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10, skpdancer1605
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
You know the right answer?
A switch-mode dc-dc converter is operating at a switching frequency of 20 kHz, and Vd ¼ 150 V. The a...
Questions in other subjects:
History, 23.04.2020 20:16
Mathematics, 23.04.2020 20:16
Mathematics, 23.04.2020 20:16
Geography, 23.04.2020 20:16
Biology, 23.04.2020 20:16
