Engineering, 11.02.2020 22:43 kids2006

A steel loop ABCD of length 5ft and of 3/8" diameter is placed as shown around a 1" diameter aluminum rod AC. Cables BE and DF each 1/2" diameter are used to apply the load Q. Knowing that the ultimate strength of the steel used for the loop and the cables is 70ksi and that the ultimate strength of the aluminum used for the rod is 38ksi. Determine the largest load Q that can be applied if an overall factor of safety of 3 is desired.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 18:10, settasav9641

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, heidiburgos1own6c0

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

continue

You know the right answer?

A steel loop ABCD of length 5ft and of 3/8" diameter is placed as shown around a 1" diameter aluminu...