Engineering, 11.02.2020 21:28 braydenmcd02
Inside a tunnel the distance between drivers and the curb is 10 ft. Assuming that the drivers fix their eyes on the curb at an angle of 2o, calculate the appropriate speed limit for a critical angular rate of change of 0.005 rad/s.
Answers: 1
Engineering, 04.07.2019 19:20, GusGus11
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
Engineering, 06.07.2019 03:20, crazylife77
What is the strain energy stored in a solid uniformly circular shaft of length 3.0 m and diameter 120 mm when subject to pure torsion if the maximum shear stress is 40 mpa? g-80gpa
Answers: 1
Engineering, 06.07.2019 04:10, jessicajustice6215
Cold water (cp=4180j/kg k) leadıng to a shower enters a thin-walled double-pipe heat transfer at 15c at a rate of 0.25kg/s and is heated to 45c by hot water (cp=4190j/kg k) that enters at 100c at the rate of 3kg/s. if the overall heat transfer coefficient is 950w /m2 k , determıne the rate of heat transfer and the heat transfer surface area of the heat exchanger using e - ntu method
Answers: 1
Inside a tunnel the distance between drivers and the curb is 10 ft. Assuming that the drivers fix th...
Mathematics, 05.02.2021 23:00
Mathematics, 05.02.2021 23:00
Mathematics, 05.02.2021 23:00
Biology, 05.02.2021 23:00