Engineering, 11.02.2020 20:56 heythere7373

A solar cell has a short circuit current density of 40 mA/cm2 and an open circuit voltage of 0.60 V under one-sun illumination at room temperature (the power from an AM1.5 global tilt spectrum). Assume Eq. 1 represents a simple description of the solar cell operation. This neglects any resistances. i=1ų– 1. (evd/VT – 1) (1) where i is the current through the photovoltaic cell.

a) Draw a circuit that models this equation (no resistances).
b) Give an equation for the open circuit voltage and short circuit current.
c) Use this ideal diode equation to calculate the open circuit voltage which is expected at 1000 suns.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 12:10, Ryantimes2

On a average work day more than work place firs are reorted

Answers: 1

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

You know the right answer?

A solar cell has a short circuit current density of 40 mA/cm2 and an open circuit voltage of 0.60 V...