Engineering, 28.01.2020 20:41 madskate9993

The gas-phase reaction is to be carried out isothermally first in a flow reactor. the molar feed is 50% h2 and 50% n2, at a pressure of 16.4 atm and at a temperature of 227°c.
(b) express the concentrations in mol/dm3 of each for the reacting species as a function of conversion. evaluate ca0, and then calculate the concentrations of ammonia and hydrogen when the conversion of h2 is 60%.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 12:10, Ryantimes2

On a average work day more than work place firs are reorted

Answers: 1

continue

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 19:10, nayi2002

The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object

Answers: 1

continue

You know the right answer?

The gas-phase reaction is to be carried out isothermally first in a flow reactor. the molar feed is...