Engineering, 25.01.2020 06:31 iliketurtures

Afloor in an office building is made of a reinforced concrete slab 10 in. deep and spans 20 ft. for the purposes of calculating the tributary load you can assume the slab is 10 ft. wide. this scenario can be modelled as a simply supported beam, 20 ft. long, 10 in. deep and 10 ft. wide.

calculate the maximum factored maximum moments and shears on this structure using the appropriate load combinations discussed in class.
note which loading combination is critical.

you can assume the uniform live load is 50 psf.

hint: since this is not a member that carries lateral load, there are no significant wind or earthquake loads contributing to the shear and moments in the member.
since this is not on the roof there are no roof or snow loads. h = 10 in. 20 ft.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, niicoleassssssf

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

continue

Engineering, 04.07.2019 18:10, lerasteidl

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

continue

Engineering, 04.07.2019 18:10, katelynn73

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

continue

Engineering, 06.07.2019 04:10, mooneyhope24

Ir at sea level and 30°c and 50% relative humidity flows at a rate of 1 kg/s through a cooling coil that has an apparatus dewpoint of 10°c. the air leaves the coil at 15°c. determine the following: 3.1)- relative humidity of the air leaving the coil; 3.2)- moisture content of the air leaving the coil; 3.3)- sensible heat factor; 3.4)- total heat transfer rate; 3.5)- sensible heat transfer rate 3.6)- latent heat transfer rate

Answers: 1

continue

You know the right answer?

Afloor in an office building is made of a reinforced concrete slab 10 in. deep and spans 20 ft. for...