subject
Engineering, 17.01.2020 07:31 bobk1433

Often when you get very involved in doing something, and really focus on it in terms of time and effort, you can readily improve your ability. a good example of this might be the ability to do pushups. if you faithfully practice doing pushups, you strengthen your arm muscles, and the number of pushups you are able to do increases, further strengthening your muscles. as soon as you let up on practicing, the cycle begins reversing. pushups become increasingly hard to do and your arms become increasingly weak. further, you become discouraged and find it more difficult to force yourself to practice regularly. 1. using the variables below, show one feedback loop that might explain the two situations descried above: strength of muscle willingness to practice number of pushups when submitting your answer, show in the format below: a --> (+) b : this represents a positive relationship between a and b. to show a feedback loop, you can do something like: a --> (+) b > c --> (+) a 2. give an example from your own experience that is similar to this pushup story.

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
image
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
image
Engineering, 04.07.2019 18:10, salazjlove
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
image
Engineering, 04.07.2019 18:10, katelynn73
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
You know the right answer?
Often when you get very involved in doing something, and really focus on it in terms of time and eff...

Questions in other subjects: