Engineering, 15.01.2020 21:31 gunner20115

Apitfall cited in section 1.10 is expecting to improve the overall performance of a computer by improving only one aspect of the computer. consider a computer running a program that requires 250 s, with 70 s spent executing fp instructions, 85 s executed l/s instructions and 40 s spent executing branch instructions

(5 min, sec 1.10)by how much is the total time reduced if the time for fp operations is reduced by 20%?

(5 min, sec 1.10) by how much is the time for int operations reduced if the total time is reduced by 20%?
(5 min, sec 1.10) can the total time be reduced by 20% by reducing only the time for branch instructions?

Answers: 3

Show answers

Answers

a) For this case the new time to run the FP operation would be reduced 20% so that means 100-20% =80% from the original time

(1-0.2)*70 s =56s

The reduction on this case is 70-56 s=14s

And since the new total time would be given by 250-14=236 s

b) For this case the total time is reduced 20% so that means that the new total time would be (1-0.2)=0.8 times the original total time (1-0.2) *250s =200 s

The original time for INT operations is calculated as:

$250 = 70+85+40 +t_{INT}$

$t_{INT}=55s$

For this part the only time that was changed is assumed the INT operations so then:

$200 = 70+85+40 \Delta t_{INT}$

And then: $\Delta t_{INT}= 200-70-85-40=5 s$

c) A reduction of the total time implies that the total time would be 205 s from the results above. And the time for FP is 70, for L/S is 85 and for INT operations is 55 s, so then if we add 70+85+55=210s, we see that 210>205 so then we cannot reduce the total time 20% just reducing the branch intructions.

Explanation:

From the info given we know that a computer running a program that requires 250 s, with 70 s spent executing FP instructions, 85 s executed L/S instructions and 40 s spent executing branch instructions.

Part 1

For this case the new time to run the FP operation would be reduced 20% so that means 100-20% =80% from the original time

(1-0.2)*70 s =56s

The reduction on this case is 70-56 s=14s

And since the new total time would be given by 250-14=236 s

Part 2

For this case the total time is reduced 20% so that means that the new total time would be (1-0.2)=0.8 times the original total time (1-0.2) *250s =200 s

The original time for INT operations is calculated as:

$250 = 70+85+40 +t_{INT}$

$t_{INT}=55s$

For this part the only time that was changed is assumed the INT operations so then:

$200 = 70+85+40 \Delta t_{INT}$

And then: $\Delta t_{INT}= 200-70-85-40=5 s$

And we can quantify the decrease using the relative change:

$\% Change = \frac{5s}{55 s} *100 = 9.09\%$ of reduction

Part 3

A reduction of the total time implies that the total time would be 205 s from the results above. And the time for FP is 70, for L/S is 85 and for INT operations is 55 s, so then if we add 70+85+55=210s, we see that 210>205 so then we cannot reduce the total time 20% just reducing the branch intructions.

Answer from: Quest

sorry what a asnns

explanation:

Answer from: Quest

answer: jesus loves you

explanation:

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, BardiFan

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 18:10, genyjoannerubiera

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

continue

Engineering, 04.07.2019 19:10, phantomlizz3233

In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?

Answers: 3

continue

You know the right answer?

Apitfall cited in section 1.10 is expecting to improve the overall performance of a computer by impr...