Engineering, 08.01.2020 05:31 chem1014
Ahorizontal cylinder is separated into two compartments by an adiabatic frictionless piston. one side contains 0.2 m3 of nitrogen and the other side contains 0.1 kg of helium, both initially at 20°c and 95 kpa. the sides of the cylinder and the helium end are insulated. now heat is added to the nitrogen side from a reservoir at 500°c until the pressure of the helium rises to 120 kpa.
determine
(a) the final temperature of the helium,
(b) the final volume of the nitrogen,
(c) the heat transferred to the nitrogen,
(d) the entropy generation during this process.
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:20, Doogsterr
For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor
Answers: 3
You know the right answer?
Ahorizontal cylinder is separated into two compartments by an adiabatic frictionless piston. one sid...
Questions in other subjects:
Mathematics, 05.05.2020 04:46
Health, 05.05.2020 04:46
