Engineering, 03.01.2020 05:31 abaroudi
Aspacer made of sae 1020 hot-rolled steel is in the form of a hollow cylinder with a nominal inside diameter of 3.2500 in and an outside diameter of 4.000 in. it is to be mounted on a solid steel shaft with a heavy force fit. specify the dimensions for the shaft and sleeve, and compute the stresses in the sleeve and shaft after installation at maximum interference. also determine the deformation of the sleeve and shaft. use the basic hole system. the modulus of elasticity of steel, e = 30 × 106 psi and poisson’s ratio, = 0.29.
Answers: 1
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10, soreese02
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
You know the right answer?
Aspacer made of sae 1020 hot-rolled steel is in the form of a hollow cylinder with a nominal inside...
Questions in other subjects:
Mathematics, 30.07.2020 22:01
Mathematics, 30.07.2020 22:01
English, 30.07.2020 22:01
