Engineering, 25.12.2019 19:31 jayla232

Atest is conducted to determine the overall heat transfer coefficient in a shell-and-tube oil-to-water heat exchanger that has 24 tubes of internal diameter 1.2 cm and length 2 m in a single shell. cold water (cp = 4180 j/kg·k) enters the tubes at 20°c at a rate of 3 kg/s and leaves at 55°c. oil (cp = 2150 j/kg·k) flows through the shell and is cooled from 120°c to 45°c. determine the overall heat transfer coefficient ui of this heat exchanger based on the inner surface area of the tubes. 8.31 kw/m2·k

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, mirmir62

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

continue

Engineering, 04.07.2019 18:20, annette211pdd8v9

For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.

Answers: 1

continue

Engineering, 04.07.2019 19:10, nayi2002

The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object

Answers: 1

continue

Engineering, 06.07.2019 04:30, alyssa0888

Asharp-edged orifice is placed in a 10-in-diameter pipe carrying ammonia. if the volume flow rate is 25 gal/min, calculate the deflection of a water manometer (a) if the orifice diameter is 1.0 in and (b) if the orifice diameter is 7.0 in. the ammonia has a specific gravity of 0.83 and a dynamic viscosity of 2.5 x 10-6 lb s/t2

Answers: 3

continue

You know the right answer?

Atest is conducted to determine the overall heat transfer coefficient in a shell-and-tube oil-to-wat...