Engineering, 24.12.2019 06:31 jojomgarcia01
A200-l tank (see fig. p4.107) initially contains water at 100 kpa and a quality of 1%. heat is transferred to the water, thereby raising its pressure and temperature. at a pressure of 2 mpa, a safety valve opens and saturated vapor at 2 mpa flows out. the process continues, maintaining 2 mpa inside until the quality in the tank is 90%, then stops. determine the total mass of water that flowed out and the total heat transfer.
Answers: 1
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, nandalabella06
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
Engineering, 04.07.2019 18:10, jojoangelique13
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:20, hayleymckee
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
A200-l tank (see fig. p4.107) initially contains water at 100 kpa and a quality of 1%. heat is trans...
Questions in other subjects:
Mathematics, 18.03.2021 18:50
Mathematics, 18.03.2021 18:50
