Engineering, 24.12.2019 05:31 veroushkarose7326

Aroom is to be heated by a coal-burning stove, which is a cylindrical cavity with an outer diameter of 50 cm and a height of 120 cm. the rate of heat loss from the room is estimated to be 1.5 kw when the air temperature in the room is maintained constant at 24°c. the emissivity of the stove surface is 0.85, and the average temperature of the surrounding wall surfaces is 14°c. determine the surface temperature of the stove. neglect the heat transfer from the bottom surface and take the heat transfer coefficient at the top surface to be the same as that on the side surface. the heating value of the coal is 30,000 kj/kg, and the combustion efficiency is 65 percent. determine the amount of coal burned in a day if the stove operates 14 h a day. evaluate air properties at a film temperature of 77°c and 1 atm pressure. is this a good assumption?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, breannaasmith1122

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

continue

Engineering, 04.07.2019 18:10, Fahaddie

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

continue

Engineering, 04.07.2019 19:10, gabrielaperezcz

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

continue

Engineering, 04.07.2019 19:10, ultimateapes

When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?

Answers: 2

continue

You know the right answer?

Aroom is to be heated by a coal-burning stove, which is a cylindrical cavity with an outer diameter...