Engineering, 24.12.2019 01:31 crtlq

Hot exhaust gases of a stationary diesel engine are to be used to generate steam in an evaporator. exhaust gases (cp = 1051 j/kg·k) enter the heat exchanger at 550°c at a rate of 0.25 kg/s while water enters as saturated liquid and evaporates at 200°c (hfg = 1941 kj/kg). the heat transfer surface area of the heat exchanger based on the water side is 0.5 m2 , and the overall heat transfer coefficient is 1780 w/m2 ·k. determine the rate of heat transfer, the exit temperature of the exhaust gases, and the rate of evaporation of the water.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, ashleybaber4966

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

continue

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

Engineering, 04.07.2019 19:10, rayne40

A)-in the process of engineering design, explain the contribution of material selection. b)- explain the procedure of synthesis as is employed in engineering design. c)- is there any relationship between ergonomics and engineering design? explain. d)- safety consideration in engineering design includes human, product and the enviroment . explain how safety will be incorporated into the design?

Answers: 3

continue

Engineering, 06.07.2019 02:30, Nonniel0v3

An electric motor is used to drive a power press which makes steel turning moment diagrams 323 pressings from a metal sheet. the motor runs at a mean speed of 50 rev/s. the torque required is 10.0nm for 0.2s, followed by 1.0nm for0.3 s with this sequence then being repeated. what is the minimum power required of the motor and the moment of incrtia required for the t1ywhcel if the speed fluctuations are to be restricted to 1.5%?

Answers: 3

continue

You know the right answer?

Hot exhaust gases of a stationary diesel engine are to be used to generate steam in an evaporator. e...