subject
Engineering, 21.12.2019 04:31 leilei2003

Astirred tank contains 1500 lbm of pure water at 70°f. at time t=0, two streams begin to flow into the tank and one is withdrawn. one input stream is a 20.0 wt% aqueous solution of nacl at 85°f flowing at a rate of 15 lbm/min, and the other is pure water at 70°f flowing at 10 lbm/min. the mass of the liquid in the tank is held constant at 1500 lbm. perfect mixing is the tank may be assumed, so that the outlet stream has the same nacl mass fraction (x) and temperature (t) as the tank contents. also assume that the heat of mixing is zero and the heat capacity of all fluids is cp=1 btu/(lbm * °f).
(a) write differential material and energy balances and use them to derive expressions for dx/dt and dt/dt.
(b) without solving the equations derived in part (a), sketch plots of t and x as a function of time (t). clearly identify values at time zero and as t > [infinity].

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, ayoismeisjjjjuan
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
image
Engineering, 04.07.2019 18:10, namira16
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
image
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
image
Engineering, 04.07.2019 18:20, CelesteN64
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
You know the right answer?
Astirred tank contains 1500 lbm of pure water at 70°f. at time t=0, two streams begin to flow into t...

Questions in other subjects:

Konu
Geography, 26.08.2019 22:30