subject
Engineering, 20.12.2019 23:31 Tyrant4life

Consider a wastewater effluent (qw = 1 m/s) with a lo = 75 mg/l and 2.0 mg/l of dissolved oxygen that is discharged into a river that has a flow rate of 8.7 m/s and a flow velocity of 2.0 ft/sec. the river just upstream of the discharge has a dissolved oxygen concentration of 7.0 mg/l and a lo of 4.7 mg/l. the temperature of the river is 15 °c and the temperature of the wastewater discharge is 24.7 °c. the deoxygenation rate constant (base e) is 0.20 d at 20°c; the reaeration rate constant (base e) is 0.50 dat 20 °c. the bod rate constant (base e) is 0.20 d at 20 °c. assume that the thetas for rate constant temperature corrections are 1.047 for all rate constants. assume sea level and fresh water conditions. a. determine the initial oxygen deficit (mg/l) and the ultimate bod, lo (mg/l) just downstream from the discharge after blending b. the time (days) and distance (miles) to reach the minimum dissolved oxygen concentration. c. the minimum dissolved oxygen concentration (mg/l) d. the dissolved oxygen that could be expected 50 miles downstream from the discharge (mg/l). e. use excel to create a graph of do vs. time. note that this is y vs. x. be sure to label the y and x axis including units and show the excel spreadsheet used to create your graph. the work you show in your calculation in partc will serve as your sample calculation.

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, BardiFan
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
image
Engineering, 04.07.2019 16:10, TheOriginalMeyah
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
image
Engineering, 04.07.2019 18:10, qwertylol12345
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
image
Engineering, 04.07.2019 18:20, luisgonz5050
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
You know the right answer?
Consider a wastewater effluent (qw = 1 m/s) with a lo = 75 mg/l and 2.0 mg/l of dissolved oxygen tha...

Questions in other subjects:

Konu
English, 05.05.2020 07:28
Konu
Mathematics, 05.05.2020 07:28