subject
Engineering, 20.12.2019 05:31 trentvw1174

Adistillation column with 100 kmol/h feed of 41 mole % a (and the rest b) produces a distillate product with xd = 0.92 and a bottom stream with xbot = 0.05 of the more volatile species a. cmo is valid and the equilibrium data is give by y = ax/[1+(a-1)x], where a = 2.86.

a) if the feed is saturated liquid, determine the minimum reflux ratio.

b) if the feed is saturated vapor, determine the minimum reflux ratio. for question c and d, the reflux ratio is 1.5 and the feed is a saturated mixture with q = 0.45.

c) determine the liquid flow rate lbar in the stripping section of the column.

d) determine the mole fraction of a in the vapor stream entering the top equilibrium stage.

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, koolgurl2003
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
image
Engineering, 04.07.2019 18:10, mirmir62
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
image
Engineering, 04.07.2019 18:10, krystabrewer3
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
image
Engineering, 04.07.2019 19:10, jimena15
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
You know the right answer?
Adistillation column with 100 kmol/h feed of 41 mole % a (and the rest b) produces a distillate prod...

Questions in other subjects:

Konu
Mathematics, 17.11.2020 21:00
Konu
English, 17.11.2020 21:00
Konu
Mathematics, 17.11.2020 21:00