Engineering, 20.12.2019 03:31 allytrujillo20oy0dib

Asteel bar with modulus of elasticity 200 gpa and diameter 10 mm is loaded in tension with an axial load of 50 kn. if a strain gage of gage factor 2.115 and resistance 120 ω is mounted on the bar in the axial direction, what is the change in resistance of the gage from the unloaded state to the strained state? if the strain gage is placed in one branch of a wheatstone bridge (r1) with the other three legs having the same base resistance (r2 = r3 = r4 = 120 ω), what is the output voltage of the bridge (vout) in the strained state, as a function of the excitation voltage? what is the stress in the bar? alciatore, david. introduction to mechatronics and measurement systems (p. 462). mcgraw-hill higher education. kindle edition.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:20, samueltaye

Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?

Answers: 1

continue

Engineering, 04.07.2019 18:20, jessie8022

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

continue

Engineering, 04.07.2019 19:10, jimena15

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

continue

Engineering, 04.07.2019 19:10, rayne40

A)-in the process of engineering design, explain the contribution of material selection. b)- explain the procedure of synthesis as is employed in engineering design. c)- is there any relationship between ergonomics and engineering design? explain. d)- safety consideration in engineering design includes human, product and the enviroment . explain how safety will be incorporated into the design?

Answers: 3

continue

You know the right answer?

Asteel bar with modulus of elasticity 200 gpa and diameter 10 mm is loaded in tension with an axial...