Engineering, 20.12.2019 03:31 Talos02

Air enters the compressor of a simple gas turbine at p1= 14 lbf/in.2, t1 = 520degreer, and a volumetric flow rate of 10,000 ft3 / min. the isentropic efficiencies of the compressor and turbine are 83% and 87%, respectively. the compressor pressure ratio is 14 and the temperature at the turbine inlet is 2500 r. on the basis of an air-standard (not cold air-standard) analysis, calculate the thermal efficiency of the cycle. the net power developed, in btu/h.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, danksans7011

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

continue

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

Engineering, 04.07.2019 18:10, ayoismeisjjjjuan

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

continue

Engineering, 04.07.2019 18:10, wyattlb97

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

continue

You know the right answer?

Air enters the compressor of a simple gas turbine at p1= 14 lbf/in.2, t1 = 520degreer, and a volumet...